HD High Durability Cut Wire
Ensure optimum shot-peening performances
Our high-durability cut wire peening shot, manufactured by a source of high quality supplier, is a specially heat-treated shot blasting media that will save you money, thanks to its extended life and premium quality construction, in guaranteeing the best performance on the market for your shot-peening process.
Users benefits
Users benefits
High durability
Homogeneous hardness & particule size
CostHomogeneous microstructure
Performances
Performances
Cost-efficiency
Thanks to its unique heat-treatment process, High-Durability Cut Wire shows an extended life of +30% compared to conventional Cut Wire, leading to more cost-efficient shot-peening operations.
Low breakage
Contributes to reduce consumption, better for the environment but also reduces risks of contamination, impingement and problematic dust.
Constant intensity
The performance of shot peening is not only measured at an instant “T”, but consistency of the process is essential. With longer lasting media, your operating mix will be stable over time, resulting in more consistent intensity.
Very high hardness available
Only known available product with a hardness of 800 HV !
For all your needs
From 0.25mm up to 3mm in diameter, and from 800HV to as low as 150 HV (Extremely soft), our wide range of high durability shot will be able to meet your needs.
Markets and applications
Markets and applications
Automotive
Aerospace
Medical
Oil & Gas
Specifications
Specifications
Below you will find the range available as standard of our HD Cut Wire shot media.
Other dimensions, hardness, and specifications available on request. Contact one of our specialists for more details.
| Size* (thou / mm) | CW-12 / 0,35 CW-35 / 0,90 |
| CW-14 / 0,35 CW-41 / 1,00 | |
| CW-17 / 0,40 CW-47 / 1,20 | |
| CW-20 / 0,50 CW-54 / 1,40 | |
| CW-23 / 0,60 CW-62 / 1,60 | |
| CW-28 / 0,70 CW-71 / 1,80 | |
| CW-32 / 0,80 CW-80 / 2.00 | |
| Specifications | SAE J441 – VDFI8001 – SAE AMS 2431/3D – SAE AMS 2431/8B
D50TF11 (GEAE) PMC (P&W) |
| Hardness* (Standard range) | 45-52 HRc (SAE AMS spec.)
55-62 HRc (SAE AMS spec.) 610-670 HV 640-700 HV 670-730 HV |
| Conditioning levels | G1 (CCW) G2 (DCCW) G3 (SCCW) |
| Packaging | BAGS
20 kg on 1,000 kg pallet
BIG BAG 500 kg 1,000 kg
METALLIC DRUM 2,000 lb |
You may also like
Resources & downloads
Resources & downloads
